Mirror Framing System - MIRREDGE

Give Your Mirrors a Face Lift for the Holidays

2011-11-16T16:15:00.000-05:00

Click here to read on how to dress up your mirrors for the Holidays! on StreetInsider.com

Kits Available

2011-10-20T14:07:00.001-05:00

Don't forget you can purchase the full mirror framing kits that include strips, corners, glue and a knife at either http://www.homedepot.com/ or http://www.bedbathandbeyond.com/.

..it looks so beautiful that I keep walking by to steal a look..

2011-04-13T10:11:00.001-05:00

Just a quick note to thank you for all of your help. I wasn't sure about how to deal with the two mirrors meeting at the inside corner. Even though there was no deterioration of the vertical edges, I used your suggestion to treat them as two separate mirrors, and it was the perfect solution. It's a stunning look, adding even more beauty.

I came this close to not ordering the mirror strips, because I didn't know how to treat the inside corner & didn't want it to look amateurish. My two other choices were to either replace both mirrors, or have the lower edges cut off each one, and I think either option might have been more expensive than doing the mirror strips.

I am planning to sell my home, and one of the mirrors was losing silver pretty badly ~ not a pretty look ~ and now it looks so beautiful that I keep walking by to steal a look. It looks like something you see in magazines.

Because the look is such a treat for sore eyes, I've decided to do two other mirrors, even though they're not losing silver, and I will be placing another order though Home Depot.
I appreciate your quick responses to my e mail; you helped so much, and I thank you again.

Jan M.

Terrific Solution

2010-06-01T14:06:00.003-05:00

"I have a large 4'x5' mirror in my master bath that was turning black on all 4 sides. I didn't want to spend the money to replace it yet and found these strips in the store.

I installed it myself (REALLY easy) and it looked great! It looked as though it was part of the original mirtror. I didn't use the corner pieces and it blended beautifully. You do need to be careful to measure perfectly before you score it." By NotHandyCathy from Chagrin Falls, Ohio

Ashley's Shanty Thrifty Find

2009-11-17T16:51:00.003-05:00

Hi Friends! I HAVE to blog about the thrifty find I made yesterday! I really don’t like the mirrors in our bathrooms but I have been patient in changing them out because I wanted to replace them with framed mirrors (for a more custom look) and that can be costly!

Well, I said it CAN be costly but as I found out yesterday my patience paid off BIG! I went to Lowe’s to buy some curtain rods when I stumbled upon a rack full of Mirredge mirror trim in several different colors. I stared at the Cherry Walnut for a while and wasn’t sure how it would look but I couldn't leave the store without it so I bought just enough for the boys bathroom upstairs.

These came in sets of two so I bought 2 sets ~ one set for the horizontal trim and one for the vertical trim. I then bought 1 set of 4 corner plates. They cover the seams and add a nice aesthetic touch.

Whitney just happened to be coming over that afternoon (how convenient for me) so she assisted me in this venture. The trim is 59.5” long, so roughly 5’. The instructions say to measure each piece on the mirror, score and then crisply snap the trim to get the right fit. This did not work (circular saw is so much more efficient – learned how to use one with this project). Measure the vertical strips first and then the horizontal. After you cut them down to size there are double-sided adhesive pads that come with the trim – just peel and stick (we put 4 to 5 on each strip).

To see the rest of the project check out my blog at: Ashley's Shanty2Chic

Home Depot Stores and Lowe's need to carry your product!!!

2009-11-17T16:20:00.006-05:00

It was a pleasure speaking with you a little while ago. I share your enthusiasm about the Mirredge product. Surprisingly, I learned about your amazing product from my plumber, who suggested that Mirredge will transform my master bathroom. At one of his customers homes, he was able to witness, first hand, how upscale your product looks and how easy it is to install. He tells all of his customers about Mirredge.

I have visited your website and scrolled through the pictures that you have posted online. I have also viewed YouTube videos with instructions on how to install MirrEdge. Your product is going to be an internet sensation!I needed my bathroom mirror cut and was telling the glass company about your product. They had never heard of it (or anything like it) but want me to let them know what I think about it once it is installed. The owner of the company seemed very interested!

I will send you a picture of my mirror upon completion. I am just so excited to have found your product! I can't wait to see how it looks.Thank you for your helpful suggestion about color and styling. I have ordered 3-36" strips of the cherry walnut with the along with the complimenting deco corner plates at Home Depot.com. Unfortunately, the seam plates that I need are not available on their website. Could you please let me know how I can purchase the seam plates?

Warmest regards,
Eileen B.
North Attleboro, MA

Mirror, Mirror, on the wall...what's the best frame of all??? Mirredge!!!

2009-10-08T10:44:00.003-05:00

I just want to thank you for all your help in placing my order for the Dove White mirror frame. I just finished installing it and I have to tell you it looks like a brand new bathroom. I had always been bothered by some discoloration at the bottom of my wall mirror. To hide it I would place objects in front. Now I will make sure I show it off!!!

Assembly was easy and the results are priceless!!! I keep looking at my "new" mirror.If you ever need references feel free to give my number. If you ever hire installers in the Boston area I am available!!! (I'm an early retired teacher looking for another career.)

Thanks again and have a great day!!!
Betsy M.

WOW!

2009-06-04T10:58:00.000-05:00

April 29, 2009 By pollyesther "I never heard of this product before and when I noticed it in the store I figured why not try it since it was inexpensive. Well I was very surprised to find out how easy it was to install and how nice it made my mirror look!"

Mirredge Product Review on Home Depot.com

2009-05-04T14:08:00.001-05:00

"The acrylic mirror strip installation kit is the perfect way to enhance a plain mirror and hide the imperfections that occur around the mirror's edge after years of use. This economical "fix" adds a classy finish with ease of application. Applied easily in a few minutes! I loved the way it transformed a plain, aging mirror into a classy new attraction in my bathroom. I plan on purchasing 2 more kits shortly for my next bathroom I remodel in which I have 2 mirrors that need sprucing up! The acrylic strips score and snap easily and if you follow the instructions completely, you will wind up with a fabulous new mirror! I am 100% satisfied!!!!

CJM"
Kansas

Thanks to Mirredge!

2009-03-16T10:57:00.001-05:00

Thankyou for the e-mail as we ll as the phone call.

The job is done and looks really very good, I used the acrylic mirror edge since there is no wood tone in that bathroom.. Had to buy many strips since the mirror goes around two walls and is about 7 feet by almost 5 feet !! The product is easy to work with once one gets "the hang' of it !!

The project went fairly fast.I am happy to say that after living in this house for almost 7 years, the bathroom mirror finally looks finished, thanks to MirrEdge.

Sincerely, Linda Williams

Dove White - WOW!

2009-02-23T10:27:00.001-05:00

Just to let you know that thanks to your e-mails where you answered my questions about where to find your Dove White Mirredge framing systems and how to measure and cut them correctly, my 3 bathrooms look phenomenal !!!! I was even able to find space savers and toilet paper storage units that matched the design that is on the corners of the mirrors!

You have come up with a great invention that has saved us a great deal of money! Thanks SO much! I have recommended Mirredge to ALL of my friends!

Thanks again for taking the time to answer my e-mails! It made all the difference in the world!

Mayra

I used Mirredge in my bathroom..

2009-02-10T10:33:00.001-05:00

I used MirrEdge in my bathroom on a older mirror that was beginning to show some age damage around the outside. I used the cherry walnut with the contemporary cormers and it looks great. (Purchased at Lowe's)

As a suggestion - you could increase the variety of the uses of the product by just creating different types of corners. While many people today love modern looking decor, we live in the country in Texas and have a more rustic look to our decor. Some corners that incorporate a star, cowboy boot, or some other rustic western theme would open up a whole new market. I had considered trying to glue rope around the mirror to hide the flaws, but realized what a mess I would make with the glue everywhere. Then I found the MirrEdge and decided that would be much simpler. I would have loved to find more variety in the corner selection to more fit the bathroom decor. Otherwise it was easy and made it look much neater.

Thanks for taking the time to listen,

Ellen

Mirredge in St Croix

2009-02-05T15:38:00.000-05:00

Have received the mirr-edge package, installed it and am very happy with the appearance of the mirror now.

Dr Mather,
St Croix, USVI

Love this product!

2009-02-05T15:35:00.000-05:00

Hi, I spoke to you a couple days ago about the mirredge. I was looking for white corner pieces in the cont. but you said you do not sell them, well I took your advice and bought the brown ones and spray painted them white. They came out perfect! I just wanted to let you know how much I love this product. As I told you we used it in another bathroom mirror and it looks so nice. We have had many compliments on it and I have told many people about it. Thanks so much for you advice and your kindness on the phone.
Thanks again,
Kay Hoppes

Only 15 minutes!

2009-02-05T15:32:00.001-05:00

Thank you! Finally a home decorating product that works, and is SIMPLE and EASY!
I put up my frame on my mirror in less than 15 minutes, with 3 children under the age of 2 running around!!

Dawn
Barrie, Ontario
CANADA

Incredibly Easy!

2009-01-14T16:49:00.003-05:00

"I just wanted to send you a quick note and let you know how much we appreciate you sending us your Mirr.Edge product and how incredibly easy it was to install. If I was able to install it, anyone can. Thanks again!" Jeremy Hollingsworth, Extreme-How-To-Magazine

New Idea from Mirredge - Splashes

2009-01-14T16:03:00.004-05:00

Want to add some pizazz to your mirror! Look at these different "SPLASHES" that can be used.

The possiblities are endless. We'd like to hear if this is something you would consider purchasing. Please email us and leave your comments at contact@mirredge.com

Your Products

2008-06-23T13:09:00.002-05:00

Hello Mirredge from England, last year about this time I was in dialogue with Florence of your company, I was anxious to obtain your product, and in fact did obtain exactly what I wanted from Lowes on a trip to Florida last year, we are really pleased with your product, and intend purchasing more when we again visit Florida in September.Purpose of this e mail is to 1) Let you know how pleased we are with Mirredge & 2) Ask if it is available in the UK yet, as it's a long way to go to obtain it after all. If you need any endorsement of your product we will be happy to oblige.

Ken & Kathryn Simpson, UK

Wood grain

2008-06-17T10:18:00.001-05:00

"I and my husband first saw this product in sky mall brochure for Southwest Airlines last year. We visited one of the Home Depot stores around our area. We bought the product and saved our aging mirror that had become an embarrassing fixiture in our beautiful bathroom!! It made quite a dramatic difference. It totally changed our bathroom and it is easy to install. TRY IT!!"
By Annek from Columbia, MD

Completed mirrors

2008-02-15T14:29:00.003-05:00

I wanted to send you a picture of two completed mirrors I did. I not only did the "builders" mirror I also did the medicine cabinet mirror. I still need to do a little paint touch up (I painted it white but will for sure buy the next kit in white already) ...... I think it looks pretty good.

Thanks

Shawna Hazelett

We loved the results...

2008-02-07T15:11:00.000-05:00

Hello Mirredge.

Attached are some photos of our mirror using Mirredge. We loved the results. Very easy to use.

We have two more bathroom mirrors which we will also do with your product. Love it.

Thanks.

Mirredge is now available in Canada!

2008-02-07T15:04:00.000-05:00

Yes, that's right, for all you Canadians, north of the border. You can now pick up Mirredge at Lowe's in Brantford, Hamilton and Brampton and there are more stores opening. Check http://www.lowes.ca/ for more information.

Mirror Installation-Mirror Maintenance Save Existing Mirrors

2007-10-22T14:58:00.000-05:00

By Florence Segal

Mirror Thickness

Most mirrors are manufactured to a thickness of 1/8” – 3/16” and ¼”. To obtain the best quality of true undistorted reflections, always use ¼” thick mirrors. Using mirrors with thicknesses less than ¼”, particularly when affixed to a wall, will most certainly provide a distorted image as the wall is not perfectly flat. Additionally, as the adhesive dries out, it tends to draw the mirror towards the wall surface distorting the mirror even further. Therefore, it is recommended to use ¼ inch thickness.

Mirror Mounting

Frameless mirrors must be suitably supported at the bottom with mechanically fastened wall retainers or they must sit on a rigid element that will support the base of the mirror.
There are two time-proven techniques for mounting a mirror: brackets and adhesion. With brackets, you have four or more metal units that clip onto the mirror and screw into the wall. The bracket method is popular because it's fast, easy to clean and reversible if you change your mind.
Adhesion: Adhesion requires a liquid glue you apply to the back of the mirror. When you place the mirror against the wall, it sticks. Adhesion works best in small places; however, it's more or less permanent and requires professional expertise to remove with minimum damage to the wall. Small repairs to the wall may also be necessary if a glued mirror is removed.
To hold a frameless mirror system in a vertical position, use either mechanically fastened wall retainer clips that are utilized at the top of the mirror or globs of a special petroleum based mirror adhesive that is applied to the wall. The mirror is then landed onto a cushioned base and then pressed into the multiple globs of this very slow drying adhesive. This pressure starts a suction action, which will hold the mirror into an acceptable vertical position without the need to apply clips at the top of the mirror. However, for security purposes, it is recommended that retaining clips be utilized. We recommend the metal Z type clips. There are two sizes, 1/8” and ¼” clips according to the size thickness of your mirror.

Toxic Chemicals in Mirrors

Most mirrors have toxic chemicals that make up the mirroring process. These include silver nitrate used for the reflective surface and red lead protective coatings with a painted seal coat used on the backing. While on the wall, these substances are contained and not harmful. Breaking up mirrors and disposing of them into landfills and the oceans release these toxic substances. However, mirrors can be made attractive without removing them from the wall.

Scratched Mirrors

If your mirror is scratched, try this do-it-yourself tip before calling a service professional: Rub a little toothpaste into the scratch. (Normally gel-type pastes are not as effective as regular pastes.) Polish with a soft cloth.

Cleaning Mirrors

Cleaning Mirrors: It is best to clean mirrors with a cleaner that does not contain ammonia. If you are not sure of the ingredients, spray the rag with cleaner so as to not get the liquid near the edge of mirror which is one of the reasons mirrors deteriorate. Another could be that the backing was not sealed properly and moisture is allowed in. Quit using ammonia-based cleaners on the mirrors. The ammonia gets behind the glass and starts to oxidize the silver finish. If you must use an ammonia-based cleaner, always spray in the middle of the mirror and avoid getting the edges wet with the cleaner.

Keeping mirrors fresh and attractive is very important. That is just about the first thing you look at when entering the bathroom area and the last thing before going to bed.

Think twice about disposing of existing plain or deteriorated mirrors. There are other options that are cost effective. MirrEdge ™ a do-it-yourself framing system or trim that can be installed around the perimeter of a mirror in minutes. The only tools needed are a razor knife and a measuring tape. The corner plates make installation virtually effortless. www.mirredge.com 800-757-2900

Mirror Maintenance & Installation Save Existing Mirrors

2007-10-22T14:40:00.001-05:00

NEW White coming out soon !

2007-10-05T15:29:00.000-05:00

Very soon white will be available for our mirror framing system.

Check our website often for details of how you can order it!!

Absolutely beautiful!

2007-07-16T08:43:00.000-05:00

I am sending you the photos of the completed mirrors as promised. Both mirrors are absolutely beautiful and we could not be more pleased.

The product is easy to work with and we had priced actually purchasing the mirror strips from a glass company. Using your product lowered the expense considerably.

We originally purchased only the wood appearing frame for the master bath but when it turned out so very well we returned to purchase for the other bath. While we were there we bragged on your product to the employee in the department and we believe she will probably use it herself and pass on our very high recommendation.

You have really created something very lovely, user friendly and a bargain to boot. Thank You

Dale & Teri Sommer
Waleska, GA

edited

Everything it claimed to be!!

2007-06-26T08:06:00.000-05:00

"I saw the mirror edge product on HGTV and knew that it would solve my problem with the look of the slab mirrors in my baths. I checked Home Depot's website and, sure enough, there they were !!I ordered and installed and, wow, they sure made a difference in the look of those slab mirrors. Easy to order...easy to use... and the results are great!!"

Katherine from Las Vegas, NV

Beveled Acrylic Mirror Strips

2007-06-26T08:03:00.000-05:00

"We had our basement finished and we have a Retro theme, black, red and white. We searched the internet looking for mirror to put between black half round moulding at chair level, to match our Black Wurlitzer Juke box. When we came across this product we were thrilled. Previously in our search we could only find 1 inch sqaure mirror. This product was so easy to work with and the effect is beautiful. We did the whole bar area and are ordering more, to trim the bar . I would highly recommend using this product. We have gotten so many compliments on it."
By Sheade714 from Lanoka Harbor, New Jersey

Great Product!

2007-05-10T09:04:00.000-05:00

I do not normally write to a manufacturer about their product. However, I was so amazed with the ease of installation, the quality of the material and the enhancement it made to my mirrors, I had to write you. I read the pamphlet, followed the 9 simple steps and in less than 20 minutes, an amazing showcase mirror for a fraction of the cost and time of replacement. Thank you for being true to your advertisement and providing a high quality simple solution for the Do-It-Youselfer. Sincerely Terry Wagner

Quick and Easy

2007-04-24T14:44:00.000-05:00

The mirror edge product line is easy to install and looks great! Many of our friends and family members could not believe the beautiful change in our bathroom. By KimberlyC from Weston, Florida

Mirror Frame Kit

2007-04-24T14:39:00.000-05:00

Made my 17 year old mirror look new. So easy to install decided to use this on another bathroom mirror. Only problem top corner pieces alittle too heavy for the stick pads that came with product. By JanJ from Memphis

Making a Difference

2007-04-05T11:56:00.000-05:00

The mirror strips were easy to install. What a difference they made! They allowed me to eliminate the aging edges of a large mirror while giving the bathroom a new look. Blest1 for NY

How To Apply Acrylic Mirr.Edge to a mirror that has existing mirror clips

2007-03-05T12:15:00.000-05:00

The best way to deal with this situation is to unscrew and relocate the plastic or metal mirror clips to within one and a half inches from each corner. Affix the horizontal and vertical Mirr.Edge Acrylic Strips in between the clips using the included double faced tape in each package, in addition to dabs of Mirr.Edge Glue Adhesive or Liquid Nails LN-600 Adhesive (sold separately) next to the double faced tape squares. Affix the Mirr.Edge Corner Plates into the corner areas and ON TOP of the Acrylic Strips in each corner, thereby covering the mirror clips.

In the event the mirror clips are not able to be relocated to the corner areas, you can piece the Acrylic Strips in between the existing clips, and cover the clips with a Mirr.Edge Cover Seam Plate, or a small piece of leftover Mirr.Edge Acrylic Strip, cut to two or three inches long, or as desired. This solution works best with the metal mirror clip, as it is only about an eigth inch thick. If you have the traditional thicker plastic mirror clips, replacing them with a metal clip would work best. These metal mirror clips can usually be found at your local home improvement stores in the mirror and/or hardware department.

One way to cover up those clips on a large mirror

2007-03-02T16:50:00.000-05:00

To cover up clips on a

larger mirror, use extrapieces

where you go around the clip

to place on top of it. How

beautiful it looks....

Black edges look awful but look what happened...

2007-02-28T16:03:00.000-05:00

BEFORE with ugly black edges from desilvering
around the edges...

AFTER - WOW!! Look how beautiful it looks

with the acrylic mirror trim....Just love IT!!!!

Double application for mirrors

2007-02-28T15:53:00.000-05:00

If you like a wider look for your mirror, you can double up on the strips and then add the corner. It's looks incredible in the Royal Oak Woodgrain finish!!

Wood grain

2007-02-22T15:17:00.000-05:00

Change your bathroom mirror by adding this border

2007-02-22T14:54:00.000-05:00

"Especially useful for large, rectangular bathroom mirrors that look like hotel mirrors. Dresses up the mirror and changes the entire look of the bathroom. Easy to install." Lina of Florida

From Hilton Hotels

2007-02-20T15:46:00.000-05:00

We continue to enjoy the results of MirrEdge which has saved me over $6000.00 in mirror replacement over the last 8 months. We were graded badly for desilvering on our guest room mirrors on our QA inspections and it is now off the radar screen.
Bob, Hilton Hotels Corp. CA

To Manager of Home Depot

2007-02-20T15:34:00.000-05:00

I am writing to tell you how happy we are with one of your newest products, MirrEdge. We recently moved into our new home in Boynton Beach and were planning to put a new beveled mirror in the master bath area at quite an expense when we happened upon this product in your store. We purchased the product and with no problem were able to install it ourselves.

It has made quite a difference in the appearance of our home and we are very pleased with the results. Thank you for carrying the product and saving us the cost of a new mirror. Now we can spend those extra dollars for something else at Home Depot.

Sincerely,

Edward & Louise
Boynton Beach, FL

Thanks

2007-02-20T15:17:00.000-05:00

Dear Mirr.Edge,

Just had to write you to say thank you for a wonderful product! I am in the process of trying to sell my home. Had unsightly black line along the bottom of the mirror that started to travel upward in one of my bathrooms. Using your product was so easy and the results were absolutely beautiful. I was able to purchase your product at Home Depot in Delray Beach, FL where I first saw the product.

Keep up the good work!
Sincerely,
Andrea M

Tell us about your experience with MIRREDGE

2007-02-19T15:41:00.000-05:00

We'd love to hear your comments about how you used Mirredge and any quick tips for others............click on the comments button

Make your mirrors 'pop'

2007-02-12T14:43:00.000-05:00

I had three mirrors that we just plain. I added the MIRR EDGE with the corners and they really 'popped'. My husband was really impressed with the change and how easily the strips were applied. shortybritches from Tennessee

Great Product

2007-02-12T14:41:00.000-05:00

easy to install and no tools needed. Added the look of wood to my bathroom mirrors at a fraction of the cost. Tanyika from Texas

MirrEdge Adhesive

2007-02-12T14:39:00.000-05:00

I used this product when hanging my MirrEdge trim on my mirror. I was really impressed with it's staying power. I also like the fact that it dried fast and I didn't have to stand there forever and hold it. The only problem was that maybe it dried a little too fast and doesn't allow you much time to adjust the trim. FirstHome from Lebanon, TN

Change your bathroom mirror by adding this border

2007-02-12T14:38:00.000-05:00

Especially useful for large, rectangular bathroom mirrors that look like hotel mirrors. Dresses up the mirror and changes the entire look of the bathroom. Easy to install. Lina from FLorida

Great Product

2007-02-12T14:37:00.000-05:00

This product is very easy to install and makes your mirrors look so great!! It really adds the perfect finishing touch to the plain mirrors you might have in your house. Horv143 from Rock Hill, SC

Mirror Edge

2007-02-12T14:35:00.000-05:00

This is an excellent product and idea. You can easily paint this product to match the trim in your room. Laxmad from Wilmington, DE

make your mirror look like new

2007-02-12T14:25:00.000-05:00

the 3 foot by 5 foot mirror in my wife's bathroom was discolored along the edges. we planned on replacing it but then we saw an ad on tv about acrylic mirror edge strips. we went on line and found that home depot sold them on line. after reviewing the ad on line we decided to get the ones that matched the mirror. I installed them very easily and they matched perfectly and look great. Seddie from Longmeadow, MA

It's really easy to install

2007-02-12T12:54:00.000-05:00

Your product is extremely easy to install, adds a high degree of style to a plain vanity mirror and best of all it is much more economical than a full replacement mirror. Gil, Boca Raton

Your Product is Great!

2007-02-12T12:47:00.000-05:00

Your product looks really beautiful, so beautiful in fact that I am going to install it in my second bathroom, and my sister is going to do the same in her home. Mary, Pembroke Pines, FL