The ladies have spoken. Home Depot is expanding their Do It Herself Workshops for women. Get hands on experience for your next workshop.
Mirredge will be at the next Do It Herself Workshop at the Boca Raton, Home Depot Store #204 at 9820 Glades Road Boca Raton, FL 33434 on Feb 21 at 6:30PM. Come by and get hands on experience with Mirredge !!
Do It Herself Workshop
Showing posts with label bathroom and vanity mirrors. Show all posts
Showing posts with label bathroom and vanity mirrors. Show all posts
Wednesday, February 13, 2013
Monday, May 4, 2009
Mirredge Product Review on Home Depot.com
"The acrylic mirror strip installation kit is the perfect way to enhance a plain mirror and hide the imperfections that occur around the mirror's edge after years of use. This economical "fix" adds a classy finish with ease of application. Applied easily in a few minutes! I loved the way it transformed a plain, aging mirror into a classy new attraction in my bathroom. I plan on purchasing 2 more kits shortly for my next bathroom I remodel in which I have 2 mirrors that need sprucing up! The acrylic strips score and snap easily and if you follow the instructions completely, you will wind up with a fabulous new mirror! I am 100% satisfied!!!!
CJM"
Kansas
CJM"
Kansas
Thursday, February 5, 2009
Mirredge in St Croix
Have received the mirr-edge package, installed it and am very happy with the appearance of the mirror now.
Dr Mather,
St Croix, USVI
Dr Mather,
St Croix, USVI
Love this product!
Hi, I spoke to you a couple days ago about the mirredge. I was looking for white corner pieces in the cont. but you said you do not sell them, well I took your advice and bought the brown ones and spray painted them white. They came out perfect! I just wanted to let you know how much I love this product. As I told you we used it in another bathroom mirror and it looks so nice. We have had many compliments on it and I have told many people about it. Thanks so much for you advice and your kindness on the phone.
Thanks again,
Kay Hoppes
Thanks again,
Kay Hoppes
Friday, February 15, 2008
Completed mirrors
I wanted to send you a picture of two completed mirrors I did. I not only did the "builders" mirror I also did the medicine cabinet mirror. I still need to do a little paint touch up (I painted it white but will for sure buy the next kit in white already) ...... I think it looks pretty good.
Thanks
Shawna Hazelett
Thursday, February 7, 2008
We loved the results...
Hello Mirredge.
Attached are some photos of our mirror using Mirredge. We loved the results. Very easy to use.
We have two more bathroom mirrors which we will also do with your product. Love it.
Thanks.
Attached are some photos of our mirror using Mirredge. We loved the results. Very easy to use.
We have two more bathroom mirrors which we will also do with your product. Love it.
Thanks.
Monday, October 22, 2007
Mirror Maintenance & Installation Save Existing Mirrors
By Florence Segal
Mirror Thickness
Most mirrors are manufactured to a thickness of 1/8” – 3/16” and ¼”. To obtain the best quality of true undistorted reflections, always use ¼” thick mirrors. Using mirrors with thicknesses less than ¼”, particularly when affixed to a wall, will most certainly provide a distorted image as the wall is not perfectly flat. Additionally, as the adhesive dries out, it tends to draw the mirror towards the wall surface distorting the mirror even further. Therefore, it is recommended to use ¼ inch thickness.
Mirror Mounting
Frameless mirrors must be suitably supported at the bottom with mechanically fastened wall retainers or they must sit on a rigid element that will support the base of the mirror.
There are two time-proven techniques for mounting a mirror: brackets and adhesion. With brackets, you have four or more metal units that clip onto the mirror and screw into the wall. The bracket method is popular because it's fast, easy to clean and reversible if you change your mind.
Adhesion: Adhesion requires a liquid glue you apply to the back of the mirror. When you place the mirror against the wall, it sticks. Adhesion works best in small places; however, it's more or less permanent and requires professional expertise to remove with minimum damage to the wall. Small repairs to the wall may also be necessary if a glued mirror is removed.
To hold a frameless mirror system in a vertical position, use either mechanically fastened wall retainer clips that are utilized at the top of the mirror or globs of a special petroleum based mirror adhesive that is applied to the wall. The mirror is then landed onto a cushioned base and then pressed into the multiple globs of this very slow drying adhesive. This pressure starts a suction action, which will hold the mirror into an acceptable vertical position without the need to apply clips at the top of the mirror. However, for security purposes, it is recommended that retaining clips be utilized. We recommend the metal Z type clips. There are two sizes, 1/8” and ¼” clips according to the size thickness of your mirror.
Toxic Chemicals in Mirrors
Most mirrors have toxic chemicals that make up the mirroring process. These include silver nitrate used for the reflective surface and red lead protective coatings with a painted seal coat used on the backing. While on the wall, these substances are contained and not harmful. Breaking up mirrors and disposing of them into landfills and the oceans release these toxic substances. However, mirrors can be made attractive without removing them from the wall.
Scratched Mirrors
If your mirror is scratched, try this do-it-yourself tip before calling a service professional: Rub a little toothpaste into the scratch. (Normally gel-type pastes are not as effective as regular pastes.) Polish with a soft cloth.
Cleaning Mirrors
Cleaning Mirrors: It is best to clean mirrors with a cleaner that does not contain ammonia. If you are not sure of the ingredients, spray the rag with cleaner so as to not get the liquid near the edge of mirror which is one of the reasons mirrors deteriorate. Another could be that the backing was not sealed properly and moisture is allowed in. Quit using ammonia-based cleaners on the mirrors. The ammonia gets behind the glass and starts to oxidize the silver finish. If you must use an ammonia-based cleaner, always spray in the middle of the mirror and avoid getting the edges wet with the cleaner.
Keeping mirrors fresh and attractive is very important. That is just about the first thing you look at when entering the bathroom area and the last thing before going to bed.
Think twice about disposing of existing plain or deteriorated mirrors. There are other options that are cost effective. MirrEdge ™ a do-it-yourself framing system or trim that can be installed around the perimeter of a mirror in minutes. The only tools needed are a razor knife and a measuring tape. The corner plates make installation virtually effortless. http://www.mirredge.com/ 800-757-2900
Mirror Thickness
Most mirrors are manufactured to a thickness of 1/8” – 3/16” and ¼”. To obtain the best quality of true undistorted reflections, always use ¼” thick mirrors. Using mirrors with thicknesses less than ¼”, particularly when affixed to a wall, will most certainly provide a distorted image as the wall is not perfectly flat. Additionally, as the adhesive dries out, it tends to draw the mirror towards the wall surface distorting the mirror even further. Therefore, it is recommended to use ¼ inch thickness.
Mirror Mounting
Frameless mirrors must be suitably supported at the bottom with mechanically fastened wall retainers or they must sit on a rigid element that will support the base of the mirror.
There are two time-proven techniques for mounting a mirror: brackets and adhesion. With brackets, you have four or more metal units that clip onto the mirror and screw into the wall. The bracket method is popular because it's fast, easy to clean and reversible if you change your mind.
Adhesion: Adhesion requires a liquid glue you apply to the back of the mirror. When you place the mirror against the wall, it sticks. Adhesion works best in small places; however, it's more or less permanent and requires professional expertise to remove with minimum damage to the wall. Small repairs to the wall may also be necessary if a glued mirror is removed.
To hold a frameless mirror system in a vertical position, use either mechanically fastened wall retainer clips that are utilized at the top of the mirror or globs of a special petroleum based mirror adhesive that is applied to the wall. The mirror is then landed onto a cushioned base and then pressed into the multiple globs of this very slow drying adhesive. This pressure starts a suction action, which will hold the mirror into an acceptable vertical position without the need to apply clips at the top of the mirror. However, for security purposes, it is recommended that retaining clips be utilized. We recommend the metal Z type clips. There are two sizes, 1/8” and ¼” clips according to the size thickness of your mirror.
Toxic Chemicals in Mirrors
Most mirrors have toxic chemicals that make up the mirroring process. These include silver nitrate used for the reflective surface and red lead protective coatings with a painted seal coat used on the backing. While on the wall, these substances are contained and not harmful. Breaking up mirrors and disposing of them into landfills and the oceans release these toxic substances. However, mirrors can be made attractive without removing them from the wall.
Scratched Mirrors
If your mirror is scratched, try this do-it-yourself tip before calling a service professional: Rub a little toothpaste into the scratch. (Normally gel-type pastes are not as effective as regular pastes.) Polish with a soft cloth.
Cleaning Mirrors
Cleaning Mirrors: It is best to clean mirrors with a cleaner that does not contain ammonia. If you are not sure of the ingredients, spray the rag with cleaner so as to not get the liquid near the edge of mirror which is one of the reasons mirrors deteriorate. Another could be that the backing was not sealed properly and moisture is allowed in. Quit using ammonia-based cleaners on the mirrors. The ammonia gets behind the glass and starts to oxidize the silver finish. If you must use an ammonia-based cleaner, always spray in the middle of the mirror and avoid getting the edges wet with the cleaner.
Keeping mirrors fresh and attractive is very important. That is just about the first thing you look at when entering the bathroom area and the last thing before going to bed.
Think twice about disposing of existing plain or deteriorated mirrors. There are other options that are cost effective. MirrEdge ™ a do-it-yourself framing system or trim that can be installed around the perimeter of a mirror in minutes. The only tools needed are a razor knife and a measuring tape. The corner plates make installation virtually effortless. http://www.mirredge.com/ 800-757-2900
Subscribe to:
Posts (Atom)